正确使用方法
●该泵组件另外需要控制回路。
● 不要卸下给油滤网，会是异物混入的原因。
● 吸滤器1 年换1 次或者清洗，请参考适应表。
● 稀油因夏天，冬天油温不同导致粘度变化，所以请注意使用粘度范围 内的稀油。
● 不要使用特殊添加物稀油、水溶性稀油、溶剂等。
● 定期检测使用中的稀油是否混入异物等，发现异物时请立即清洗油箱， 更换新油。
● 请注意电压等错误。
● 吐出口的接头不要拧过头，请参考安装扭力表。
● 同时准备了低粘度式样，有意见请咨询。 型号编制说明规格

Directions for use
● This pump unit requires a separate control circuit to operate.
● Do not remove the oil fill strainer in order to keep the pump clear of foregn matter.
● Replace the suction filter at least once a year.
● Oil viscosity varies with oil temperature. Be sure to use oil within the working viscosity range.
● Do not use any special additive-contained oil, water soluble oil, or solvent.
● Periodically check the oil in the reservoir for impurities. Replace it, if necessary, with fresh oil immediately. Be sure to clean the reservoir before replacing oil.
● Make sure that proper voltage is applied.
● Do not over tighten the discharge joint.
● Low-oil viscosity versions are available. Contact us for information.